{"id":65151,"date":"2019-07-09T07:31:31","date_gmt":"2019-07-09T11:31:31","guid":{"rendered":"https:\/\/www.mdaturbines.com\/?p=65151"},"modified":"2022-04-06T08:15:50","modified_gmt":"2022-04-06T12:15:50","slug":"7a3-generator-stator-and-field-rewind","status":"publish","type":"post","link":"https:\/\/www.mdaturbines.com\/resources\/7a3-generator-stator-and-field-rewind\/","title":{"rendered":"Comprehensive Generator Stator and Field Rewind"},"content":{"rendered":"

Mechanical Dynamics & Analysis (MD&A) recently completed a generator stator and field rewind on a GE\u00ae 7A3 generator during a planned customer outage. All stator work was completed on-site, and the field rewind was performed at our Turbine-Generator Repair facility in St. Louis, MO.<\/p>\n

Stator Rewind<\/h3>\n

MD&A performed a complete rewind of the generator stator<\/a> during this outage. The rewind kit supplied by MD&A included new stator bars, connection rings, and end winding support components.<\/p>\n

The rewind process began with the removal of the stator wedges and stator bars. Following bar removal, the stator slot walls and core vent ducts were cleaned and prepared for bar installation. The core was both visually inspected and electrically tested using an Electromagnetic Core Imperfection (ELCID) test to identify any shorted laminations that could lead to future overheating and damage. ELCID tests were performed three times throughout the rewind process with no relevant indications found.<\/p>\n

\"New<\/p>\n

The winding installation included the replacement of the original end winding supports and connection rings. Additionally, Glaskyd sausage (conforming material) was installed in place of the original radial rings between the top and bottom bars in the end winding. Conductive side ripple springs were installed to ensure proper electrical contact between the slot wall and the bar. Following bar installation, a contact measurement test was performed to ensure the bars were properly grounded to the core.<\/p>\n

New connection rings were then installed, and all series and phase connections were brazed using induction heating. The bars were appropriately blocked, and the series loops were insulated with two-piece molded caps filled with insulating epoxy filler. Following stator slot wedge installation, all final electrical tests were completed with excellent results.<\/p>\n

\"\"<\/p>\n

Field Rewind<\/h3>\n

Once removed from the stator, the generator field was identified with damaged end-winding blocking. The field was then sent to our Turbine-Generator Repair Facility<\/a> in St. Louis, MO.<\/p>\n

Incoming electrical testing was completed once the field arrived in St. Louis, confirming multiple shorts within the field winding. After the retaining rings were removed and the unit was inspected, MD&A recommended a full rewind to remove the shorted turns and properly adjust the end-winding blocking. After the rewind was authorized by the customer, the unit was stripped and cleaned. During this time, all removed components underwent a complete visual and NDE inspection. Indications were noted on one of the snap rings. Ultimately, the customer elected to have both snap rings replaced at the same time.<\/p>\n

After the copper windings were removed, electrical testing<\/a> was completed on the bore copper and collector rings with acceptable results. The coils were blast cleaned and inspected. Following the inspection, the coils were deemed suitable for continued operation and returned to service. The wedges were blast cleaned and sent for NDE inspection. The field body was blast cleaned and underwent NDE inspections. All NDE results were satisfactory, and the field body was repainted. The field forging and field body wedges were returned to service.<\/p>\n

\"Removal<\/p>\n

After each coil was re-installed, an AC Hi-Pot test was performed, and an AC turn-to-turn test was completed. A baker surge test was then completed on each coil to ensure that there were no shorts present in the winding.<\/p>\n

The turn insulation was coated on one side with heat-cured glue. This glue required a bake cycle of the rotor after it was wound. After the bake, a full set of electrical tests were completed and the unit underwent a high-speed balance<\/a>, two heat runs (with a flux probe test before each heat run). All test results were acceptable.<\/p>\n

MD&A is a full-service, OEM-alternative for generator service, parts, and repairs with a 35+ year track record of successful generator stator and field repairs. All inspections and necessary repairs are completed by our experts in a timely manner that allows units to be placed back online on an expedited basis.<\/p>\n

Call MD&A today for any generator repair<\/a> at +1 (314) 880-3000 or use our Contact form<\/a>.<\/p>\n

\"\"<\/p>\n

View the video<\/a> to see how you can minimize costly outages by having our expert technicians perform your next full stator rewind.<\/strong><\/p>\n

 <\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

Mechanical Dynamics & Analysis (MD&A) recently completed a generator stator and field rewind on a GE\u00ae 7A3 generator during a planned customer outage.<\/p>\n","protected":false},"author":2,"featured_media":65157,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"content-type":"","footnotes":""},"categories":[210],"tags":[213,212,214,79,121],"class_list":["post-65151","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-generator","tag-7a3-generator","tag-elcid","tag-field-rewind","tag-generator-inspection","tag-stator-rewind"],"acf":[],"yoast_head":"\nComprehensive Generator Stator and Field Rewind – MDA Turbines<\/title>\n<meta name=\"description\" content=\"During a planned customer outage MD&A completed a generator stator and field rewind on a GE\u00ae 7A3 generator, both on-site and in-house.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.mdaturbines.com\/resources\/7a3-generator-stator-and-field-rewind\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Comprehensive Generator Stator and Field Rewind – MDA Turbines\" \/>\n<meta property=\"og:description\" content=\"During a planned customer outage MD&A completed a generator stator and field rewind on a GE\u00ae 7A3 generator, both on-site and in-house.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.mdaturbines.com\/resources\/7a3-generator-stator-and-field-rewind\/\" \/>\n<meta property=\"og:site_name\" content=\"MDA Turbines\" \/>\n<meta property=\"article:publisher\" content=\"http:\/\/www.facebook.com\/mdaturbines\" \/>\n<meta property=\"article:published_time\" content=\"2019-07-09T11:31:31+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2022-04-06T12:15:50+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.mdaturbines.com\/wp-content\/uploads\/2019\/07\/1_WP.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"747\" \/>\n\t<meta property=\"og:image:height\" content=\"498\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Kelly Plunkett\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Kelly Plunkett\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"4 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.mdaturbines.com\\\/resources\\\/7a3-generator-stator-and-field-rewind\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.mdaturbines.com\\\/resources\\\/7a3-generator-stator-and-field-rewind\\\/\"},\"author\":{\"name\":\"Kelly Plunkett\",\"@id\":\"https:\\\/\\\/www.mdaturbines.com\\\/#\\\/schema\\\/person\\\/ee0e84e14abc852781ad53a495c0533c\"},\"headline\":\"Comprehensive Generator Stator and Field Rewind\",\"datePublished\":\"2019-07-09T11:31:31+00:00\",\"dateModified\":\"2022-04-06T12:15:50+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.mdaturbines.com\\\/resources\\\/7a3-generator-stator-and-field-rewind\\\/\"},\"wordCount\":691,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/www.mdaturbines.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.mdaturbines.com\\\/resources\\\/7a3-generator-stator-and-field-rewind\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.mdaturbines.com\\\/wp-content\\\/uploads\\\/2019\\\/07\\\/1_WP.jpg\",\"keywords\":[\"7A3 generator\",\"ELCID\",\"field rewind\",\"generator inspection\",\"stator rewind\"],\"articleSection\":[\"Generator\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.mdaturbines.com\\\/resources\\\/7a3-generator-stator-and-field-rewind\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.mdaturbines.com\\\/resources\\\/7a3-generator-stator-and-field-rewind\\\/\",\"url\":\"https:\\\/\\\/www.mdaturbines.com\\\/resources\\\/7a3-generator-stator-and-field-rewind\\\/\",\"name\":\"Comprehensive Generator Stator and Field Rewind – MDA Turbines\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.mdaturbines.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.mdaturbines.com\\\/resources\\\/7a3-generator-stator-and-field-rewind\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.mdaturbines.com\\\/resources\\\/7a3-generator-stator-and-field-rewind\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.mdaturbines.com\\\/wp-content\\\/uploads\\\/2019\\\/07\\\/1_WP.jpg\",\"datePublished\":\"2019-07-09T11:31:31+00:00\",\"dateModified\":\"2022-04-06T12:15:50+00:00\",\"description\":\"During a planned customer outage MD&A completed a generator stator and field rewind on a GE\u00ae 7A3 generator, both on-site and in-house.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.mdaturbines.com\\\/resources\\\/7a3-generator-stator-and-field-rewind\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.mdaturbines.com\\\/resources\\\/7a3-generator-stator-and-field-rewind\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.mdaturbines.com\\\/resources\\\/7a3-generator-stator-and-field-rewind\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.mdaturbines.com\\\/wp-content\\\/uploads\\\/2019\\\/07\\\/1_WP.jpg\",\"contentUrl\":\"https:\\\/\\\/www.mdaturbines.com\\\/wp-content\\\/uploads\\\/2019\\\/07\\\/1_WP.jpg\",\"width\":747,\"height\":498,\"caption\":\"generator stator and field rewind\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.mdaturbines.com\\\/resources\\\/7a3-generator-stator-and-field-rewind\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.mdaturbines.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Comprehensive Generator Stator and Field Rewind\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.mdaturbines.com\\\/#website\",\"url\":\"https:\\\/\\\/www.mdaturbines.com\\\/\",\"name\":\"MD&A Turbines\",\"description\":\"MDA Turbines is one of the largest turbine-generator repair and turbine engineering organizations in the US..\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.mdaturbines.com\\\/#organization\"},\"alternateName\":\"Mechanical Dynamics & Analysis\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.mdaturbines.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.mdaturbines.com\\\/#organization\",\"name\":\"Mechanical Dynamics & Analysis\",\"alternateName\":\"MD&A Turbines\",\"url\":\"https:\\\/\\\/www.mdaturbines.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.mdaturbines.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.mdaturbines.com\\\/wp-content\\\/uploads\\\/2019\\\/01\\\/MDA_logo.gif\",\"contentUrl\":\"https:\\\/\\\/www.mdaturbines.com\\\/wp-content\\\/uploads\\\/2019\\\/01\\\/MDA_logo.gif\",\"width\":1179,\"height\":258,\"caption\":\"Mechanical Dynamics & Analysis\"},\"image\":{\"@id\":\"https:\\\/\\\/www.mdaturbines.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"http:\\\/\\\/www.facebook.com\\\/mdaturbines\",\"https:\\\/\\\/x.com\\\/mdaturbines\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.mdaturbines.com\\\/#\\\/schema\\\/person\\\/ee0e84e14abc852781ad53a495c0533c\",\"name\":\"Kelly Plunkett\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/d3226d1c3a5895b8e94c98ac7ba906834a28fd94afa044b35e616d164290cffb?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/d3226d1c3a5895b8e94c98ac7ba906834a28fd94afa044b35e616d164290cffb?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/d3226d1c3a5895b8e94c98ac7ba906834a28fd94afa044b35e616d164290cffb?s=96&d=mm&r=g\",\"caption\":\"Kelly Plunkett\"},\"sameAs\":[\"https:\\\/\\\/www.mdaturbines.com\"],\"url\":\"https:\\\/\\\/www.mdaturbines.com\\\/resources\\\/author\\\/kelly-plunkett\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Comprehensive Generator Stator and Field Rewind – MDA Turbines","description":"During a planned customer outage MD&A completed a generator stator and field rewind on a GE\u00ae 7A3 generator, both on-site and in-house.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.mdaturbines.com\/resources\/7a3-generator-stator-and-field-rewind\/","og_locale":"en_US","og_type":"article","og_title":"Comprehensive Generator Stator and Field Rewind – MDA Turbines","og_description":"During a planned customer outage MD&A completed a generator stator and field rewind on a GE\u00ae 7A3 generator, both on-site and in-house.","og_url":"https:\/\/www.mdaturbines.com\/resources\/7a3-generator-stator-and-field-rewind\/","og_site_name":"MDA Turbines","article_publisher":"http:\/\/www.facebook.com\/mdaturbines","article_published_time":"2019-07-09T11:31:31+00:00","article_modified_time":"2022-04-06T12:15:50+00:00","og_image":[{"width":747,"height":498,"url":"https:\/\/www.mdaturbines.com\/wp-content\/uploads\/2019\/07\/1_WP.jpg","type":"image\/jpeg"}],"author":"Kelly Plunkett","twitter_misc":{"Written by":"Kelly Plunkett","Est. reading time":"4 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.mdaturbines.com\/resources\/7a3-generator-stator-and-field-rewind\/#article","isPartOf":{"@id":"https:\/\/www.mdaturbines.com\/resources\/7a3-generator-stator-and-field-rewind\/"},"author":{"name":"Kelly Plunkett","@id":"https:\/\/www.mdaturbines.com\/#\/schema\/person\/ee0e84e14abc852781ad53a495c0533c"},"headline":"Comprehensive Generator Stator and Field Rewind","datePublished":"2019-07-09T11:31:31+00:00","dateModified":"2022-04-06T12:15:50+00:00","mainEntityOfPage":{"@id":"https:\/\/www.mdaturbines.com\/resources\/7a3-generator-stator-and-field-rewind\/"},"wordCount":691,"commentCount":0,"publisher":{"@id":"https:\/\/www.mdaturbines.com\/#organization"},"image":{"@id":"https:\/\/www.mdaturbines.com\/resources\/7a3-generator-stator-and-field-rewind\/#primaryimage"},"thumbnailUrl":"https:\/\/www.mdaturbines.com\/wp-content\/uploads\/2019\/07\/1_WP.jpg","keywords":["7A3 generator","ELCID","field rewind","generator inspection","stator rewind"],"articleSection":["Generator"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.mdaturbines.com\/resources\/7a3-generator-stator-and-field-rewind\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.mdaturbines.com\/resources\/7a3-generator-stator-and-field-rewind\/","url":"https:\/\/www.mdaturbines.com\/resources\/7a3-generator-stator-and-field-rewind\/","name":"Comprehensive Generator Stator and Field Rewind – MDA Turbines","isPartOf":{"@id":"https:\/\/www.mdaturbines.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.mdaturbines.com\/resources\/7a3-generator-stator-and-field-rewind\/#primaryimage"},"image":{"@id":"https:\/\/www.mdaturbines.com\/resources\/7a3-generator-stator-and-field-rewind\/#primaryimage"},"thumbnailUrl":"https:\/\/www.mdaturbines.com\/wp-content\/uploads\/2019\/07\/1_WP.jpg","datePublished":"2019-07-09T11:31:31+00:00","dateModified":"2022-04-06T12:15:50+00:00","description":"During a planned customer outage MD&A completed a generator stator and field rewind on a GE\u00ae 7A3 generator, both on-site and in-house.","breadcrumb":{"@id":"https:\/\/www.mdaturbines.com\/resources\/7a3-generator-stator-and-field-rewind\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.mdaturbines.com\/resources\/7a3-generator-stator-and-field-rewind\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.mdaturbines.com\/resources\/7a3-generator-stator-and-field-rewind\/#primaryimage","url":"https:\/\/www.mdaturbines.com\/wp-content\/uploads\/2019\/07\/1_WP.jpg","contentUrl":"https:\/\/www.mdaturbines.com\/wp-content\/uploads\/2019\/07\/1_WP.jpg","width":747,"height":498,"caption":"generator stator and field rewind"},{"@type":"BreadcrumbList","@id":"https:\/\/www.mdaturbines.com\/resources\/7a3-generator-stator-and-field-rewind\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.mdaturbines.com\/"},{"@type":"ListItem","position":2,"name":"Comprehensive Generator Stator and Field Rewind"}]},{"@type":"WebSite","@id":"https:\/\/www.mdaturbines.com\/#website","url":"https:\/\/www.mdaturbines.com\/","name":"MD&A Turbines","description":"MDA Turbines is one of the largest turbine-generator repair and turbine engineering organizations in the US..","publisher":{"@id":"https:\/\/www.mdaturbines.com\/#organization"},"alternateName":"Mechanical Dynamics & Analysis","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.mdaturbines.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.mdaturbines.com\/#organization","name":"Mechanical Dynamics & Analysis","alternateName":"MD&A Turbines","url":"https:\/\/www.mdaturbines.com\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.mdaturbines.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.mdaturbines.com\/wp-content\/uploads\/2019\/01\/MDA_logo.gif","contentUrl":"https:\/\/www.mdaturbines.com\/wp-content\/uploads\/2019\/01\/MDA_logo.gif","width":1179,"height":258,"caption":"Mechanical Dynamics & Analysis"},"image":{"@id":"https:\/\/www.mdaturbines.com\/#\/schema\/logo\/image\/"},"sameAs":["http:\/\/www.facebook.com\/mdaturbines","https:\/\/x.com\/mdaturbines"]},{"@type":"Person","@id":"https:\/\/www.mdaturbines.com\/#\/schema\/person\/ee0e84e14abc852781ad53a495c0533c","name":"Kelly Plunkett","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/d3226d1c3a5895b8e94c98ac7ba906834a28fd94afa044b35e616d164290cffb?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/d3226d1c3a5895b8e94c98ac7ba906834a28fd94afa044b35e616d164290cffb?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/d3226d1c3a5895b8e94c98ac7ba906834a28fd94afa044b35e616d164290cffb?s=96&d=mm&r=g","caption":"Kelly Plunkett"},"sameAs":["https:\/\/www.mdaturbines.com"],"url":"https:\/\/www.mdaturbines.com\/resources\/author\/kelly-plunkett\/"}]}},"_links":{"self":[{"href":"https:\/\/www.mdaturbines.com\/wp-json\/wp\/v2\/posts\/65151","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.mdaturbines.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.mdaturbines.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.mdaturbines.com\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.mdaturbines.com\/wp-json\/wp\/v2\/comments?post=65151"}],"version-history":[{"count":5,"href":"https:\/\/www.mdaturbines.com\/wp-json\/wp\/v2\/posts\/65151\/revisions"}],"predecessor-version":[{"id":70326,"href":"https:\/\/www.mdaturbines.com\/wp-json\/wp\/v2\/posts\/65151\/revisions\/70326"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.mdaturbines.com\/wp-json\/wp\/v2\/media\/65157"}],"wp:attachment":[{"href":"https:\/\/www.mdaturbines.com\/wp-json\/wp\/v2\/media?parent=65151"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.mdaturbines.com\/wp-json\/wp\/v2\/categories?post=65151"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.mdaturbines.com\/wp-json\/wp\/v2\/tags?post=65151"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}